SolarEdge Commercial Inverter Cover – A wide shade cover built for SolarEdge 100kW to 120kW three phase inverters with Synergy technology. Won't rust, mounts in minutes, and keeps direct sun and rain off your inverter.
Made to order: This cover is manufactured to order and ships in approximately 10–12 weeks. Ordering 10 or more for a project? Contact us for project pricing.
Overview: Commercial inverters often sit in full sun, on exposed walls beside the array. This cover shades the full width of a SolarEdge Synergy installation in one piece. It is made from 2 mm high-grade 5000 series marine aluminum and finished in a durable powder coat. Because it's aluminum rather than galvanized steel, it won't rust.
Features:
- Won't Rust: Made from 5000-series marine-grade aluminum, which can't rust. Galvanized steel covers rely on a zinc coating, and wherever that coating is cut, drilled or scratched the steel underneath can start to rust. There's no coating on ours to wear through.
- Sized for SolarEdge Synergy: 43.46 inches (1104 mm) of clear internal width, with a sloped top that sheds rain away from the wall.
- Easy Removal: The cover hangs on four keyhole slots. Lift it off the wall screws for full access during service, then hang it back on.
- Optimal Airflow: Open at the bottom and at the rear of both sides, with clearance around the inverter, so heat can escape and the inverter keeps running efficiently.
- Cable Management: Large openings on both sides (21.38 inches / 543 mm tall) leave room for conduit, disconnects and cabling.
Installation: The cover is designed for wall mounting. The package includes four main cover pieces (front, top and two sides) plus the bolts for assembly. Assemble the cover, insert four screws into the wall at your chosen location, and hang the cover on its keyhole slots.
Maximum Product Dimensions: These are the outermost dimensions of the cover including the legs.
- Imperial: 30.46 x 51.29 x 13.11 inches (H x W x D)
- Metric: 773.7 x 1302.8 x 333 mm (H x W x D)
Internal width is 43.46 inches (1104 mm). See product photos for detailed dimensions.
Disclaimer
Sunridge Covers' protective covers are designed to shield your solar inverters and batteries from environmental factors. Proper installation and usage according to our instructions are necessary to ensure optimal performance. While we believe that using our products should not void the manufacturer warranties of your solar inverters and batteries, we strongly advise customers to check with their manufacturers to confirm. Sunridge Covers is not liable for any damage or failure resulting from improper use or installation of our products.