Looks good. Fits well around conduits, cables etc. A second person would be helpful when attaching to the wall but it was manageable solo. The 'Chicago screws' which act as hinges are fiddley and just adequate in size and strength
















Solar Inverter Cover – Won't Rust, Easy Access, Matches Your Battery Cover
Overview: Shade your solar inverter from sun and rain with a cover built from 5000-series marine-grade aluminum and finished in a durable powder coat, in Surf Mist (off-white) or Basalt (charcoal gray). Because it's aluminum, not galvanized steel, it won't rust, even in coastal air. It's designed to look like part of your house, not a box bolted to the wall.
Features:
Installation: Comes with step-by-step instructions, the four cover pieces, assembly bolts and screws, and wall screws. Assemble the cover, then screw it securely to your wall. See the assembly instructions.
Maximum Dimensions (outside, including legs):
See the product photos for detailed internal dimensions.
Want a different color? This cover is also made to order in 20 powder-coat colors to match your home (approximately 2–3 months).
Free shipping from our Los Angeles warehouse.
Disclaimer
Sunridge Covers' protective covers are designed to shield your solar inverters and batteries from sun and rain. Install and use them according to our instructions. While we believe that using our products should not void the manufacturer warranties of your solar inverters and batteries, we strongly advise customers to check with their manufacturers to confirm. Sunridge Covers is not liable for any damage or failure resulting from improper use or installation of our products. Our covers are not rated for hurricane-force winds; see our FAQs.

Our covers fit most popular US inverters and home batteries, including SolarEdge, Tesla, Fronius, SMA, Enphase and FranklinWH. Each product page has a compatibility list for US models. We recommend at least 1.2 in (30 mm) of clearance around your equipment for airflow.
Each product page lists the dimensions in inches and millimeters, with a diagram showing the internal size.
Orders ship from our Los Angeles warehouse, usually within 1–2 business days. Delivery typically takes 2–7 business days depending on where you are, and you'll get a tracking link as soon as your order ships. Custom-color covers are made to order and take approximately 2–3 months; the estimated ship date is shown on each product page.
Yes. Shipping is free on every order within the USA, sent from our Los Angeles warehouse.
Inverter covers have a front panel that lifts open: loosen the thumb screws at the bottom and lift. The cover stays screwed to the wall.
Battery covers use keyhole slots on each leg. Lift the cover until the mounting screws line up with the keyholes, then pull it away to remove the whole cover.
No. Our covers are designed to shade your equipment from sun and rain. They are not rated or tested for hurricane-force winds, flying debris or storm surge, and our warranty does not cover damage from hurricanes, tornadoes or other severe weather. We are not responsible for damage to your cover, your equipment or your property caused by severe weather. If you are in a hurricane area, remove your cover when a storm is forecast: battery covers lift straight off their keyhole mounts, and inverter covers unscrew from the wall. If you are unsure, check with your installer or local building department about wind requirements in your area.
Yes. Inverters and home batteries sold in the US are outdoor-rated (typically NEMA 3R or 4X), so they're sealed against rain and dust. But many manufacturers recommend shading them from direct sun, because heat reduces output and ages components faster. That's what our covers do.
Yes, as long as there's enough space for the unit's fan and airflow to keep it cool. A fully enclosed box would trap heat. Our covers leave clearance on all sides, plus room for disconnect switches and conduit.
If your inverter or battery sits in direct sun or gets hit by rain, a cover helps it run cooler and last longer. The best spot for solar equipment is inside a garage, but that isn't always possible. When yours is outside, we've got you covered.
No, we don't install covers. Anyone handy with basic tools can install one in about 10–15 minutes. Every cover comes with clear instructions, and most installs only need a drill and one or two hand tools.