SolarEdge Commercial Inverter Cover
Compatibility & Size Guide
Dimensions
Shipping, Returns & Warranty
Description
SolarEdge Commercial Inverter Cover – A wide shade cover built for SolarEdge 100kW to 120kW three phase inverters with Synergy technology. Won't rust, mounts in minutes, and keeps direct sun and rain off your inverter.
Made to order: This cover is manufactured to order and ships in approximately 10–12 weeks. Ordering 10 or more for a project? Contact us for project pricing.
Overview: Commercial inverters often sit in full sun, on exposed walls beside the array. This cover shades the full width of a SolarEdge Synergy installation in one piece. It is made from 2 mm high-grade 5000 series marine aluminum and finished in a durable powder coat. Because it's aluminum rather than galvanized steel, it won't rust.
Features:
- Won't Rust: Made from 5000-series marine-grade aluminum, which can't rust. Galvanized steel covers rely on a zinc coating, and wherever that coating is cut, drilled or scratched the steel underneath can start to rust. There's no coating on ours to wear through.
- Sized for SolarEdge Synergy: 43.46 inches (1104 mm) of clear internal width, with a sloped top that sheds rain away from the wall.
- Easy Removal: The cover hangs on four keyhole slots. Lift it off the wall screws for full access during service, then hang it back on.
- Optimal Airflow: Open at the bottom and at the rear of both sides, with clearance around the inverter, so heat can escape and the inverter keeps running efficiently.
- Cable Management: Large openings on both sides (21.38 inches / 543 mm tall) leave room for conduit, disconnects and cabling.
Installation: The cover is designed for wall mounting. The package includes four main cover pieces (front, top and two sides) plus the bolts for assembly. Assemble the cover, insert four screws into the wall at your chosen location, and hang the cover on its keyhole slots.
Maximum Product Dimensions: These are the outermost dimensions of the cover including the legs.
- Imperial: 30.46 x 51.29 x 13.11 inches (H x W x D)
- Metric: 773.7 x 1302.8 x 333 mm (H x W x D)
Internal width is 43.46 inches (1104 mm). See product photos for detailed dimensions.
Disclaimer
Sunridge Covers' protective covers are designed to shield your solar inverters and batteries from environmental factors. Proper installation and usage according to our instructions are necessary to ensure optimal performance. While we believe that using our products should not void the manufacturer warranties of your solar inverters and batteries, we strongly advise customers to check with their manufacturers to confirm. Sunridge Covers is not liable for any damage or failure resulting from improper use or installation of our products.
FAQ
Do your covers suit my solar inverter, battery or my space?
Our covers fit most popular US inverters and home batteries, including SolarEdge, Tesla, Fronius, SMA, Enphase and FranklinWH. Each product page has a compatibility list for US models. We recommend at least 1.2 in (30 mm) of clearance around your equipment for airflow.
Where can I find product dimensions?
Each product page lists the dimensions in inches and millimeters, with a diagram showing the internal size.
How long does delivery take?
Orders ship from our Los Angeles warehouse, usually within 1–2 business days. Delivery typically takes 2–7 business days depending on where you are, and you'll get a tracking link as soon as your order ships. Custom-color covers are made to order and take approximately 2–3 months; the estimated ship date is shown on each product page.
Is shipping free?
Yes. Shipping is free on every order within the USA, sent from our Los Angeles warehouse.
How can I access my inverter or battery once the cover is installed?
Inverter covers have a front panel that lifts open: loosen the thumb screws at the bottom and lift. The cover stays screwed to the wall.
Battery covers use keyhole slots on each leg. Lift the cover until the mounting screws line up with the keyholes, then pull it away to remove the whole cover.
Are your covers hurricane rated?
No. Our covers are designed to shade your equipment from sun and rain. They are not rated or tested for hurricane-force winds, flying debris or storm surge, and our warranty does not cover damage from hurricanes, tornadoes or other severe weather. We are not responsible for damage to your cover, your equipment or your property caused by severe weather. If you are in a hurricane area, remove your cover when a storm is forecast: battery covers lift straight off their keyhole mounts, and inverter covers unscrew from the wall. If you are unsure, check with your installer or local building department about wind requirements in your area.
Can solar inverters be installed outside? Can solar batteries be installed outside?
Yes. Inverters and home batteries sold in the US are outdoor-rated (typically NEMA 3R or 4X), so they're sealed against rain and dust. But many manufacturers recommend shading them from direct sun, because heat reduces output and ages components faster. That's what our covers do.
Can you cover a solar inverter? Can you cover a solar battery?
Yes, as long as there's enough space for the unit's fan and airflow to keep it cool. A fully enclosed box would trap heat. Our covers leave clearance on all sides, plus room for disconnect switches and conduit.
Do I really need a solar inverter cover? Do I really need a battery cover?
If your inverter or battery sits in direct sun or gets hit by rain, a cover helps it run cooler and last longer. The best spot for solar equipment is inside a garage, but that isn't always possible. When yours is outside, we've got you covered.
Can you install my cover?
No, we don't install covers. Anyone handy with basic tools can install one in about 10–15 minutes. Every cover comes with clear instructions, and most installs only need a drill and one or two hand tools.